JN0-683최신인증시험대비자료 - JN0-683최고품질시험덤프공부자료

Itexamdump의Juniper JN0-683시험자료의 문제와 답이 실제시험의 문제와 답과 아주 비슷합니다. 우리의 짧은 학습가이드로 빠른 시일 내에 관련지식을 터득하여 응시준비를 하게 합니다. 우리는 우리의Juniper JN0-683인증시험덤프로 시험패스를 보장합니다.

Juniper JN0-683 시험요강:

주제	소개
주제 1	VXLAN: This part requires knowledge of VXLAN, particularly how the control plane manages communication between devices, while the data plane handles traffic flow. Demonstrate knowledge of how to configure, Monitor, or Troubleshoot VXLAN.
주제 2	Data Center Interconnect: For Data Center Engineers, this part focuses on interconnecting data centers, covering Layer 2 and Layer 3 stretching, stitching fabrics together, and using EVPN-signaled VXLAN for seamless communication between data centers.
주제 3	EVPN-VXLAN Signaling: This section assesses an understanding of Ethernet VPN (EVPN) concepts, including route types, multicast handling, and Multiprotocol BGP (MBGP). It also covers EVPN architectures like CRB and ERB, MAC learning, and symmetric routing.
주제 4	Data Center Deployment and Management: This section assesses the expertise of data center networking professionals like architects and engineers, focusing on key deployment concepts. Topics include Zero-touch provisioning (ZTP), which automates device setup in data centers without manual input.

>> JN0-683최신 인증시험 대비자료 <<

높은 통과율 JN0-683최신 인증시험 대비자료 인기 덤프자료

저희가 알아본 데 의하면 많은it인사들이Juniper인증JN0-683시험을 위하여 많은 시간을 투자하고 잇다고 합니다.하지만 특별한 학습 반 혹은 인터넷강이 같은건 선택하지 않으셨습니다.때문에 패스는 아주 어렵습니다.보통은 한번에 패스하시는 분들이 적습니다.우리 Itexamdump에서는 아주 믿을만한 학습가이드를 제공합니다.우리 Itexamdump에는Juniper인증JN0-683테스트버전과Juniper인증JN0-683문제와 답 두 가지 버전이 있습니다.우리는 여러분의Juniper인증JN0-683시험을 위한 최고의 문제와 답 제공은 물론 여러분이 원하는 모든 it인증시험자료들을 선사할 수 있습니다.

최신 JNCIP-DC JN0-683 무료샘플문제 (Q23-Q28):

질문 # 23
Exhibit.

Referring to the configuration shown in the exhibit, assume that there is no external router present, and that the configuration is fabric-only.
Which two statements are true about the example configuration? (Choose two.)

A. Devices in routing instance Customer A are able to communicate with devices in routing instance Customer B
B. Devices in irb.400 (vlan 400) are not able to communicate directly with devices in routing instance Customer A.
C. VNI 10006 is assigned to vlan 800 (irb.800).
D. Devices in irb.400 (vlan 400) and irb.800 (vlan 800) are able to communicate over the fabric.

정답：B,D

설명：
* Understanding the Configuration:
* The exhibit shows configurations for two VRFs (Customer_A and Customer_B) with specific VLANs and VNIs assigned. Each VRF has interfaces (IRBs) associated with particular VLANs.
* Communication Between VLANs and Routing Instances:
* Option B:VLAN 400 (irb.400) is part of Customer_B, and there is no direct connection or routing between Customer_A and Customer_B in the configuration provided. Therefore, devices in irb.400 cannot communicate directly with devices in the Customer_A routing instance.
* Option D:Since irb.400 (VLAN 400) and irb.800 (VLAN 800) are part of the same routing instance (Customer_B), they can communicate over the fabric using VXLAN encapsulation.
Conclusion:
* Option B:Correct-There is no direct communication between devices in irb.400 (Customer_B) and routing instance Customer_A.
* Option D:Correct-Devices in VLAN 400 and VLAN 800 can communicate within the Customer_B routing instance over the fabric.

질문 # 24
Exhibit.

Referring to the configuration shown in the exhibit, assume that there is no external router present, and that the configuration is fabric-only.
Which two statements are true about the example configuration? (Choose two.)

A. Devices in routing instance Customer A are able to communicate with devices in routing instance Customer B
B. Devices in irb.400 (vlan 400) are not able to communicate directly with devices in routing instance Customer A.
C. VNI 10006is assigned to vlan 800 (irb.800).
D. Devices in irb.400 (vlan 400) and irb.800 (vlan 800) are able to communicate over the fabric.

정답：B,D

질문 # 25
You are asked to set up an IP fabric thatsupports Al or ML workloads. You have chosen to use lossless Ethernet in this scenario, which statement is correct about congestion management?

A. The switch experiencing the congestion notifies the source device.
B. Only the source and destination devices need ECN enabled.
C. ECN marks packets based on WRED settings.
D. ECN is negotiated only among the switches that make up the IP fabric for each queue.

정답：A

설명：
* Understanding Lossless Ethernet and Congestion Management:
* Lossless Ethernet is crucial for AI and ML workloads, where packet loss can significantly degrade performance. To implement lossless Ethernet, congestion management protocols like ECN (Explicit Congestion Notification) are used.
* Role of ECN in Congestion Management:
* Option A:In an IP fabric that supports lossless Ethernet, when a switch experiences congestion, it can mark packets using ECN. This marking notifies the source device of the congestion, allowing the source to reduce its transmission rate, thereby preventing packet loss.
Conclusion:
* Option A:Correct-The switch experiencing congestion notifies the source device via ECN marking.

질문 # 26
Which two statements are true about IP fabrics using unnumbered BGP? (Choose two.)

A. Unnumbered BGP requires that family inet is configured on each interface.
B. Unnumbered BGP requires that family inet6 is configured on each interface.
C. Unnumbered BGP peering automatically provisions IPv6 peering.
D. Unnumbered BGP peering automatically provisions IPv4 peering.

정답：B,D

설명：
https://www.juniper.net/documentation/us/en/software/nce/nce-225-bgp-unnumbered/index.html

질문 # 27
Exhibit.

Connections between hosts connected to Leaf-1 and Leaf-2 are not working correctly.
Referring to the exhibit, which two configuration changes are required to solve the problem? (Choose two.)

A. Configure the set switch-options service-id 1 parameter on Leaf-2.
B. Configure the set switch-options vrf-target target: 65000:55 parameter on Leaf-2.
C. Configure the setswitch-options route-distinguisher 192.168.100.51:2 parameter on Leaf-1.
D. Configure the setswitch-options vtep-source-interface100. 0 parameter on Leaf-1.

정답：A,B

설명：
* Review of the Exhibit:
* The exhibit shows the switch configuration for Leaf-1 and Leaf-2. The configurations include route distinguishers, VRF targets, and service IDs, all of which are crucial for ensuring proper operation in an EVPN-VXLAN environment.
* Service-ID Consistency:
* The service ID must be consistent across all participating leaf devices in the same EVPN instance to ensure that they are part of the same VXLAN overlay network.
* VRF Target Consistency:
* The vrf-target parameter must also be consistent across devices to ensure that VRFs (Virtual Routing and Forwarding instances) are correctly imported and exported between leaf nodes.
Conclusion:
* Option B:Correct-Setting the same service-id on Leaf-2 ensures that it is part of the same VXLAN overlay as Leaf-1.
* Option D:Correct-The vrf-target on Leaf-2 should match Leaf-1 to ensure consistent routing policies and proper route exchange.

질문 # 28
......

Juniper인증 JN0-683시험패스 공부방법을 찾고 있다면 제일 먼저Itexamdump를 추천해드리고 싶습니다. Juniper인증 JN0-683시험이 많이 어렵다는것은 모두 알고 있는 것입니다. Itexamdump에서 출시한 Juniper인증 JN0-683덤프는 실제시험을 대비하여 연구제작된 멋진 작품으로서 Juniper인증 JN0-683시험적중율이 최고입니다. Juniper인증 JN0-683시험패스를 원하신다면Itexamdump의 제품이 고객님의 소원을 들어줄것입니다.

JN0-683최고품질 시험덤프 공부자료: https://www.itexamdump.com/JN0-683.html

Jon West Jon West

Biography

JN0-683최신인증시험대비자료 - JN0-683최고품질시험덤프공부자료

Juniper JN0-683 시험요강:

높은 통과율 JN0-683최신 인증시험 대비자료 인기 덤프자료

최신 JNCIP-DC JN0-683 무료샘플문제 (Q23-Q28):

لينكات

للتواصل